Description Of Operation; Description Of The Operating Modes - sauter TRA 410 Technical Manual

TRA 410, 421

Description of operation

8 Description of operation
8.1

Description of the operating modes

P100015830 B
TRA 410 TRA 421
P
P
P
P
TRA 410 TRA 421 Symbol
P P
P P
P
TRA 410 TRA 421 Symbol
P P
P P
P P
P
Symbol Description
Reset to factory settings
Time and day programme
"Setting" time programme
Setting for min. floor temper-
ature
Procedure
Press to call up the menu.
Press to change to operating modes.
Press to call up the menu.
Turn to go to "Settings" .
Press to change settings.
Press to call up the menu.
Turn to go to "Parameters" .
Press to change parameters.
Procedure
Press to confirm the selection.
TRA 410: Regulate to the defined setpoint temperature
TRA 421: Regulate to the preset setpoint temperature
in the "Settings" menu
Press to confirm the selection.
Note: Decrease via the room thermostat or an external
signal or time programme. Both cannot be activated.
TRA 410: Decrease of 2 °C.
Note: When the decrease is selected, the Decrease
input is deactivated.
TRA 421: Regulate to the preset reduced temperature
in the "Settings" menu.
Note: When the decrease is selected, the time pro-
gramme for the decrease is deactivated.
Switches off the room thermostat. The temperature
control is deactivated.
Switch on by pressing the rotary knob for 5 seconds.
Active functions are displayed. The last active function
is applied.
Note for TRA 421: The valve and frost protection re-
main active. The Pilot clock output remains active;
switching signals are forwarded.
Press to confirm the selection.
Set the number of days of absence by turning and
confirm the entry. The maximum number is 99 days.
The function is deactivated when the number of days
is set to 0 or the setpoint temperature is adjusted.
13/19