Equipment For Testing In Loopback Mode (1 Jumper Method) - Fluke DTX-MFM2 User Manual

A
Tester with fiber module and connector adapter installed
(match connector adapter to the connectors in the link)
B
Memory card (optional)
C
AC adapter with line cord (optional)
D
Test reference cord. Match the fiber to be tested. Long
end must have SC connector. For the other connectors,
match the connectors in the link.
Downloaded from Elcodis.com electronic components distributor
Figure 11. Equipment for Testing in Loopback Mode (1 Jumper Method)
E
Two singlemode adapters of the appropriate type
F
Mandrel. Recommended when testing multimode
fiber with a DTX-MFM2 module. See page 12.
G
Fiber cleaning supplies
H
A microscope for inspecting fiber connectors (the
FT500 FiberInspector Mini Video Microscope is shown)
Certifying Fiber Cabling
amd49f.eps
29