GE GFD43 Owner's Manual page 14

REVERSING THE DOOR SWING (if desired)
MOVE STRIKE BRACKET (cont.)
5
B. Switch the strike bracket and its cover to
the opposite side by removing the screws.
Reinstall both on the opposite side.
14
Optional Instructions
REINSTALL DOOR ASSEMBLY
6
A. Install the door on the dryer. To ease this
step, the hinge has keyholes that allow a
partially fastened screw to be used as a
hook.
Partially fasten a screw to the uppermost
screw hole. Hook the door on the partially
fastened screw.
Fasten the hinge by installing the other 3
screws and tightening the partially fastened
screw above.
First partially install
top hinge screw in
dryer and hang door
from it
Then secure with all
screws
B. Align the outer ring in the door and fasten
the 6 tapping screws located around the
perimeter of the door outlining the gasket.
49-90585