GE GFD43 Owner's Manual page 13

REVERSING THE DOOR SWING (if desired)
REINSTALL HINGE ASSEMBLY
3
B. Hold the hinge in place and turn the door
over. Install the hinge using the 6 machine
screws removed earlier.
REINSTALL HINGE COVER
4
A. Turn the door over and place the hinge cover
in the opposite side of the door as shown. Align
the hinge cover holes with the holes in the door.
49-90585
Optional Instructions
Hinge
Hinge cover
shown on
opposite
side
REINSTALL HINGE COVER (cont.)
4
B. Hold the hinge cover in place and turn the
door over. Install the hinge cover using the 2
machine screws removed earlier.
Hinge
Cover
MOVE STRIKE BRACKET
5
A. Using a putty knife or any other flat tool,
remove the 4 beauty buttons located on the
dryer where the door will be installed and
install them on the opposite side.
13