Advertisement
Cleaning & Care
1. Wear safety glasses to protect your eyes while cleaning.
2. Unplug the power tool.
3. For optimum use, regularly check to see if any dust or foreign matter has
entered the ventilation slots near the motor and around the power switch. Use
a soft brush to clean.
4. Sawdust may block the laser beam. Clean the laser generator periodically.
5. If the body of the tool needs cleaning, wipe it with a soft damp cloth. Use only
mild detergent, if needed.
6. Do NOT immerse any electrical tool, its cord, or its plug, into water.
7. Ensure all parts are dried thoroughly before reassembling and/or using this
tool.
10
Wards.com
Wards.com
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
1
888
•
Notes
1
888
557
3848
•
•
•
557
3848
•
•
11
Advertisement
