Download Print this page

Montgomery Ward SG775185 Instruction Manual

2-tool combo kit

Advertisement

Quick Links

®
®
2-Tool Combo Kit
Instruction Manual
Montgomery Ward Customer Service
8:00 am to Midnight, Monday through Friday
Item: 775185
wards.com 1•888•557•3848
wards.com 1•888•557•3848

Advertisement

loading

Summary of Contents for Montgomery Ward SG775185

  • Page 1 ® ® 2-Tool Combo Kit Instruction Manual Montgomery Ward Customer Service 8:00 am to Midnight, Monday through Friday Item: 775185 wards.com 1•888•557•3848 wards.com 1•888•557•3848...
  • Page 2: Table Of Contents

    • The power cord must reach the work area with enough length to allow free movement while working. Thank you for purchasing your Montgomery Ward 2-Tool Combo Kit. • If an extension cord is used, it must be a cord for outdoor use and the electrical Put through the paces by the experts, we guarantee that these tools rating should be at least as great as the electrical rating of the tool.
  • Page 3: Important Safeguards

    11. Forward/Reverse Switch into the outlet, try reversing the plug. If it still does not fit, contact a qualified elec- trician. DO NOT attempt to modify the plug in any way. Montgomery Ward cannot (Right View) accept any liability for damage or injury resulting from failure to observe these safety procedures.
  • Page 4: How To Use

    How to Use How to Use (cont.) DRILL CIRCULAR SAW 1. Make sure the drill is OFF (trigger is not depressed) and cord is unplugged. NOTE: This circular saw is designed for sawing straight cuts in wood, materials 2. While holding the collar of the chuck with one hand, rotate the chuck counter- similar to wood or plastics.
  • Page 5: Cleaning & Care

    How to Use (cont.) Cleaning & Care 1. Turn off and unplug the power tool. ADJUSTING THE CUT ANGLE 2. Always allow it to cool completely before cleaning. 1. Loosen the miter lock screw. 3. Keep vents clean and unobstructed at all times. Blow out any dust and dirt at 2.
  • Page 6: Troubleshooting

    Troubleshooting Notes Problem Possible Causes Likely Solutions ________________________________________________________ Tool will not start. Cord not connected. Check that cord is plugged in. No power at outlet. Check outlet and circuit breaker. ________________________________________________________ Tool is overheated. Turn off, unplug and let tool cool down.
  • Page 7 • Credit your account 1 Year Limited Warranty • Send a replacement Montgomery Ward, Inc. warrants this product You can return any unused item in its original packaging within 60 to be free from defects in material and workmanship days of its receipt for a full refund of the purchase price (excluding for one year from provable date of purchase.

This manual is also suitable for:

775185