Advertisement
Electrical Safety
This appliance is equipped with a polarized plug in which one prong is wider
than the other. This is a safety feature to reduce the risk of electrical shock. The
plug will fit into a polarized outlet only one way. If you are unable to insert the plug
into the outlet, try reversing the plug. If it still does not fit, contact a qualified
electrician. Do NOT attempt to modify the plug in any way. Montgomery Ward can
not accept any liability for damage or injury resulting from failure to observe these
safety procedures.
Never use the cord for carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges and moving parts. Never wrap the cord tightly
around the power tool. We do not recommend using an extension cord with this
saw. However, IF AN EXTENSION CORD IS USED, the marked electrical rating
should be at least as great as the electrical rating of this power tool. Avoid body
contact with pipes, radiators, ranges and refrigerators. There is an increased risk of
electrical shock if your body is grounded.
Specifications
POWER RATING
RATED SPEED (NO LOAD)
RATED SPEED (LOAD)
MAX CUTTING DEPTH
MAX CUTTING DEPTH AT 450
MITER DEGREE
BLADE SIZE
WEIGHT
DIMENSIONS (WITHOUT
CASE)
MODEL
4
4
12AMP, 60Hz, 1500W
4500 rpm
3800 rpm
2.5"
1.75"
0-45
7.25", 24-TOOTH
9.2 lbs.
13.3" X 10.1" X 9.8"
M1Y-DU26-185j
Wards.com
Parts & Features
1. Power Switch Trigger
2. Safety Lock Switch
3. Cutting Depth Clamping Knob
4. Baseplate
5. Miter Clamping Knob
6. Miter Guide
7. Blade Lock Pin
8. Handle and Handgrip
9. Saw Blade Safety Guard
10. Blade Clamping Washer &
Mounting Flange
1
888
•
11. Blade Guard Knob
12. Dust Extraction Port
13. Saw Blade
14. Depth Adjustment Pivot Shaft
15. Parallel Guide Clamping Knob
16. Laser
17. Laser Power Switch
18. Laser Battery Compartment
19. Carry Case (not shown)
20. Hex Wrench (not shown)
557
3848
•
•
5
Advertisement
