EBU25614
Replacing the tail/brake light bulb
If the tail/brake light bulb burns out, replace it as
follows.
1. Remove the tail/brake light bulb holder (to-
gether with the bulb) by turning it counter-
clockwise.
8
1. Tail/brake light bulb holder
2. Remove the burnt-out bulb by pushing it in
and turning it counterclockwise.
1
1. Tail/brake light bulb
3. Insert a new bulb into the bulb holder, push it
in, and then turn it clockwise until it stops.
4. Install the bulb holder (together with the bulb)
by turning it clockwise.
EBU25652
Removing a wheel
1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
8-61
1