To install the panel
1. Connect the coupler, and then place the pan-
el in the original position.
2. Install the quick fasteners.
8
3. Place the carrier in the original position, and
then install the carrier bolts under the fenders.
4. Install the carrier top bolts, and then tighten
all bolts to the specified torques.
Tightening torques:
Carrier bolt (top):
34 N·m (3.4 kgf·m, 25 lb·ft)
Carrier bolt (under fenders):
7 N·m (0.7 kgf·m, 5.2 lb·ft)
5. Install the cover.
For
YFM45KPXJ /
YFM45KPHJ: Install the handlebar-mount-
ed light cover.
For YFM45KDXJ / YFM45KDHJ: Install the
handlebar cover.
6. Install the panels.
EBU23214
Checking the spark plug
The spark plug is an important engine component,
which is easy to check. Since heat and deposits
will cause any spark plug to slowly erode, the
spark plug should be removed and checked in ac-
cordance with the periodic maintenance and lubri-
cation chart. In addition, the condition of the spark
plug can reveal the condition of the engine.
To remove the spark plug
1. Remove the spark plug cap.
8-15
YFM45KPAJ /