Set A Route To A Stored Waypoint; Backlight Adjustment; Lamp Timer; Buddy List (Manage Your Buddy List) - Lowrance Link-2 User Manual

4-1-4 Set a route to a stored waypoint

MENU SELECT WAYPOINT
►WAYPOINT ►WP LIST
BACKLIGHT NEAREST WP
LAMP TEMP
GO
HOME
►YES
NO
1. Hold down CALL/MENU for about 3 seconds (US only); or press MENU (EU only).
2. The cursor is at WAYPOINT. Press ENTER.
3. The cursor is at WP list, press ENTER. The cursor is at new WP, scroll down to the
waypoint to use as the route then press ENTER.
4. The cursor is at GO and push ENTER and enter the navigation mode. The waypoint is
set as your next destination.

4-2 Backlight adjustment

1. Select BACKLIGHT and press ENTER. There are 8 backlight levels.
2. SQ / to adjust the setting. Press ENTER to confirm the setting and return to the
MENU SELECT.
MENU SELECT
BACKLIGHT
WAYPOINT ■ ■ ■ ■
►BACKLIGHT
LO
LAMP

4-3 Lamp timer

1. Select LAMP and press ENTER. There are 4 timer settings: Always on, 5s, 15s, 30s
(default).
2. Press CH / to adjust the setting. Press ENTER to confirm the setting and return to
the MENU SELECT.
MENU SELECT LAMP TIMEOUT
►ALWAYS ON
WAYPOINT
►BACKLIGHT 5 SECOND
LAMP 15 SECOND
24 Lowrance - Link-2 Installation and Operation Instructions
WP LIST HOME
►GO
NEW WP
FISH 1 WP EDIT
►HOME
DELETE
HI

4-4 Buddy list (Manage your buddy list)

You can use the buddy list to store names and associated MMSIs of 20 DSC stations that
you call frequently. Buddy names are stored in the order of entry, with the most recent
entry first.
The following sections demonstrates how to use BUDDY LIST, these include: to add, edit,
and delete entries.

4-4-1 Add a new buddy name

You can enter up to 20 buddy names. When your BUDDY LIST is full, you cannot make a
new entry until you have deleted an existing entry.
• Each buddy name can have a maximum of 11 alphanumeric characters
• The most recent buddy name entered is shown at the top of your buddy list.
MENU SELECT
BUDDY LIST
LAMP ►MANUAL NEW
►BUDDY LIST
CONTRAST
ENTER NAME
ENTER NAME
STARFISH 2
STARFISH 2
ENTER MMSI
ENTER MMSI
0 _ _ _ _ _ _ _
123456789
1. Hold down CALL/MENU for 3 seconds.
2. Select BUDDY LIST then press ENTER.
3. The cursor is at <MANUAL>. Push ENTER.
4. Use the CH / to enter the new buddy name one character at a time. Then press
ENTER until the cursor moves to the MMSI entry line.
5. Use CH / to enter the 9-digit MMSI that is associated with that buddy name, one
number at a time, then press ENTER.
6. After you enter the last digit of the MMSI, a new screen appears automatically to
show the new buddy name and MMSI. Check that it is correct; and then push ENTER
to save the new entry. (If it is not correct, select EXIT).
Lowrance - Link-2 Installation and Operation Instructions
ENTER NAME ENTER NAME
_ _ _ _ _ _ _ _ _
STARFISH 2
ENTER MMSI ENTER MMSI
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
►MANUAL NEW
STARFISH 2
123456789 STARFISH 2
►STORE
SEA ROSE
CANCEL MERMAID
25