Storing Phone Numbers In The Phone Book - Sony CM-B1200 Operating Instructions Manual

Storing phone numbers in the Phone Book

Your phone features a built-in Phone Book memory, in which you can
store up to 99 (01–99) phone numbers with names. You can dial stored
numbers quickly by recalling them from the Phone Book (see page 31).
Each phone number can contain up to 32 digits, and each name up to 12
characters. This section shows how to store, edit and erase Phone Book
numbers quickly.
In the following example, the phone number to be stored is 123-456-7890
and the name is SONY.
1
On the standby display, use
the number buttons to enter
the number.
The number appears on the display.
You can also store hyphens, pauses and links with your
Phone Book entries (see page 27).
2
Push .
The Options menu appears.
3
Turn to select "Save", then push
A display appears prompting you for a name to
accompany the number.
4
Use the number buttons to enter the name.
If you press the same button in quick succession, the
letter you just entered changes. (See the "Alphanumeric
table" on page 20.) For the next entry, wait until the
cursor moves one step to the right or use
to move the cursor and insert spaces between characters.
If you enter the wrong character, press
character highlighted by the cursor.
To enter "SONY"
Press 7 PQ four times to enter an "S".
RS
Press 6 three times to enter an "O". Wait until the cursor
MNO
moves one step to the right for the next entry.
6
Press twice to enter an "N".
MNO
Press 9 three times to enter a "Y".
WX
YZ
B2200 25-38draft3
CLR
25
123-456-7890
:Options
.
/ or
to clear the
25
8/21/98, 12:12 PM