Related Manuals for Syris SYRD245-1N-N
Summary of Contents for Syris SYRD245-1N-N
- Page 1 SYRD245-1N-N 2.45 GHz RFID Network Reader User Manual Version 1.2 2008/10/23 http://www.xtive.com.tw/...
- Page 2 SYRD245-1N-N active RFID Network Reader User Manual Ⅰ. Product Specification Communication 2.45 GHz Support read and write Frequency 2.40~2.48 GHz Channel Address 65536 RSSI 0-255 0-255 Programmable Set Parameter Multi-LED visual indication Ethernet 10/100 base-T Ethernet (RJ-45) RS-232 RX, TX...
- Page 3 SYRD245-1N-N active RFID Network Reader User Manual Ⅱ. The Diagram of the System Connection SYRD245-1N-N Network Reader can connect with 3 different interfaces： RJ-45 ,RS-232 and RS-485. SYRD245-1N-N connection to PC http://www.xtive.com.tw/...
- Page 4 SYRD245-1N-N active RFID Network Reader User Manual SYRD245-1N-N connection to RS-485 http://www.xtive.com.tw/...
- Page 5 SYRD245-1N-N active RFID Network Reader User Manual Ⅳ. Setup MDNET-2 Click on Search Button, showing that the program is searching for network module connected to this network. http://www.xtive.com.tw/...
- Page 6 SYRD245-1N-N active RFID Network Reader User Manual After the search is finished, all network module found will be shown in the right panel of the window. If you locate more than one module connected to this network, refer to the MAC address on the module(s) to determine which modules are the ones you wish to configure.
- Page 7 SYRD245-1N-N active RFID Network Reader User Manual The Configuration window has 6 tabs: Basic, Network, Operating Mode, Accessible IPs, Password and Serial. Basic: You can set Device Name here. Network: You must assign a valid IP address to network module before it will work in your network environment.
- Page 8 SYRD245-1N-N active RFID Network Reader User Manual Serial: You should set up network module serial parameters as below diagram. http://www.xtive.com.tw/...
- Page 9 SYRD245-1N-N active RFID Network Reader User Manual Operating Mode: Three different Socket Modes are available: TCP Server, TCP Client, and UDP mode. The main difference between the TCP and UDP protocols is that TCP guarantees delivery of data by requiring the recipient to send an acknowledgement to the sender.
- Page 10 SYRD245-1N-N active RFID Network Reader User Manual Ⅵ. TCP Server Mode In TCP Server mode, SYRD245-1N-N reader provides a unique IP:Port address on a TCP/IP network. SYRD245-1N-N reader wait passively to be contacted by the host computer, allowing the host computer to establish a connection with and get data from the serial device.
- Page 11 SYRD245-1N-N active RFID Network Reader User Manual When you finished change operating mode, you can execute SYRIS Xtive demo program to read TAG. (SYRIS Xtive CD-ROM\SYRD245-1\Utility\Xtive.exe) Select and modify correct IP address to communicate with Reader. (You can communicate multi-reader at the same time) Starting read TAG will receive Tag information from reader.
- Page 12 SYRD245-1N-N active RFID Network Reader User Manual Field Introduction: a. UID: Tag’s identification number. b. RSSI: Received Signal Strength Indication (0-255). Reading range and RSSI are inverse proportion. c. LQI: Link quality indicator (0-255). d. DI: TAG status and indicator.
- Page 13 SYRD245-1N-N active RFID Network Reader User Manual Select “View Select TAG” tab to get target TAG information. http://www.xtive.com.tw/...
- Page 14 SYRD245-1N-N active RFID Network Reader User Manual Ⅶ. TCP Client Mode In TCP Client mode, SYRD245-1N-N reader can actively establish a TCP connection to a pre-defined host computer when serial data arrives. Setting Operating Mode Select “TCP Client Mode” and set up “Destination Host” IP address than press “OK”...
- Page 15 SYRD245-1N-N active RFID Network Reader User Manual When you finished change operating mode, you can execute SYRIS Xtive demo program to read TAG. (SYRIS Xtive CD-ROM\SYRD245-1\Utility\Xtive.exe) Select “TCP Client” Tab and starting read TAG will receive Tag information from reader.
- Page 16 SYRD245-1N-N active RFID Network Reader User Manual Ⅷ. UDP mode Compared to TCP communication, UDP is faster and more efficient. In UDP mode, you can multicast data from the SYRD245-1N-N to multiple host computers, and the serial device can also receive data from multiple host computers, making this mode ideal for message display applications.
- Page 17 SYRD245-1N-N active RFID Network Reader User Manual When you finished change operating mode, you can execute SYRIS Xtive demo program and setup communication port to read TAG. (SYRIS Xtive CD-ROM\SYRD245-1\Utility\Xtive.exe) Select “UDP” Tab and starting read TAG will receive Tag information from reader.
- Page 18 Changes or modifications not expressly approved by SYRIS Technology Corp. Could void the user's authority to operate this equipment.
Need help?
Do you have a question about the SYRD245-1N-N and is the answer not in the manual?
Questions and answers