Hagstrom KEUSB24 User Manual page 10

Open: Recall a previously saved confi guration fi le by either
clicking on "Open" with the mouse or by pressing Ctrl+O on the
keyboard. Locate and select the name of the confi guration fi le
on the PC that is to be opened.
Save: Once a confi guration setup has been created on the
program screen, it is recommended that it be saved on the PC's
hard disk. Click on "Save" with the mouse or press Ctrl+S on the
keyboard, then choose a location to save the fi le.
Read from KEUSB24 (1): This option will read the current
confi guration in the KEUSB24 and display it on the screen. Click
on "Read from KEUSB24" with the mouse or press Ctrl+R on the
keyboard to perform this operation.
Write to KEUSB24 (1): This option will write the current
confi guration displayed on the screen to the KEUSB24. The
KEUSB24 can be programmed and re-programmed as many
times as necessary. Click on "Write to KEUSB24" with the mouse
or press Ctrl+W on the keyboard to perform this operation. After
the KEUSB24 has been loaded with the new confi guration, it will
scan according to this new setup.
Read from KEUSB24 (2): This option will read the current
confi guration from a unit confi gured as Device ID 2.
Write to KEUSB24 (2): This option will write the current
confi guration from a unit confi gured as Device ID 2.
Exit: This option exits and closes the KEUSB24.EXE program.
*Note:
Make sure that the KEUSB24 is connected to the PC
before performing either the "Read to KEUSB24" or "Write to
KEUSB24" operations. If the KEUSB24 is not present, a "The
KEUSB24 was not Found" error will be displayed on the computer
screen.
8