Garz & Fricke Yocto User Manual page 52

GUF-Yocto-jethro-9.0-r7707-0
Optionally the debugger could be configured in the the
entry and enter the Path here:
!
/opt/guf/GUF-Yocto-jethro-9.0-r7707-0-sdk/sysroots/x86_64-gufsdk-linux/usr/bin/arm-
guf-linux-gnueabi/arm-guf-linux-gnueabi-gdb
,
The next step is checking the version the
!
/opt/guf/GUF-Yocto-jethro-9.0-r7707-0-sdk/sysroots/x86_64-gufsdk-linux/usr/bin/qt5/
qmake
,
s
as seen in [ Figure 12].
In the last configuration step we combine the previous configuration steps to a kit in the
Generic Linux Device and set the options so that the previously created settings are used. The
needs to be set to something like
/opt/guf/GUF-Yocto-jethro-9.0-r7707-0-sdk/sysroots/imx6guf-guf-linux-gnueabi
and the Qt mkspec is set to
linux-oe-g++
52
i.MX6 User Manual
¡ ¡
Figure 11: Qt Creator compiler options
Debuggers
Qt Versions section. It should be set to
Figure 12: Qt Creator Qt Versions
section. Press add to create a new debugger
Kits section. Add a new
Sysroot setting