Garz & Fricke Yocto User Manual page 21

Figure 4: Automatic transfer process from storage medium (left hand) to the targets root file system (right hand)
after plugging the storage
Warning: The user should be carefull by copying system files that may lead to an unusable system.
Garz & Fricke refuses to carry responsibility for damages caused by the users copying process. Fur-
ther, the user should consider to disable or restrict this mechanism to copy only carefully selected
files by customizing the
responsibility is up to the user.
Enabling/Disabling: Starting with OS Release 33 and newer the
via XML-configuration and the
For backward compatibility the
explicit setting for this function. To be able to configure each of the
to install an XML-configuration file specifying explicit state-settings for the
configuration files are available from Garz & Fricke:
rbcfg-enable-autojobs.xml:
rbcfg-disable-autojobs.xml:
These may be installed like all other XML-configuration files via the
root@santaro:~# export TFTP=172.20.0.146
root@santaro:~# curl tftp://$TFTP/rbcfg-enable-autojobs.xml > /tmp/cfg.xml
root@santaro:~# xconfig import -y /tmp/cfg.xml
Afterwards you can query and enable/disable each
Enable autocopy function:
root@santaro:~# sconfig autocopy all
Disable autocopy function:
root@santaro:~# sconfig autocopy off
Query current state of autocopy
root@santaro:~# sconfig autocopy
off
/etc/udev/scripts/mount.sh
sconfig tool.
autocopy function is still enabled by default if the XML-configuration contains no
Enables all
Disables all
autojob
function:
GUF-Yocto-jethro-9.0-r7707-0
script in the field to prevent missuse. Again, the
autocopy function may be enabled/disabled
autojob functions individually, you may have
autojob
autojob functions (default behaviour).
functions.
autojob
xconfig tool, e.g.:
individually using sconfig.
i.MX6 User Manual
¡ ¡
functions. At least two such
21