Power Lift Recliner Disassembly - Pride Mobility Power Lift Recliner Series Owner's Manual

I V. A S S E M B L Y / D I S A S S E M B L Y

Power Lift Recliner Disassembly

The back portion of KD Power Lift Recliners can be removed to make service and transport of the power
lift recliner more convenient.
Follow these steps to disassemble the power lift recliner:
NOTE: If equipped with a heat and massage option, be sure to disconnect the heat and/or
massage harnesses from the junction box.
4.3.1 Remove the bottom of the back fabric from the hook
and loop flaps on the chair base.
4.3.3 Using a large flat-head screwdriver, lift the left and
right locking clips on the chair-back one side at a
time to raise the back from the connections on the
chair base. As you lift each locking clip, pull up on
the chair-back to lift that side over the lock.
16
4.3.2 For 107 Power Lift Recliners, unzip the chair-back
from the chair base, then disengage the reusable
fastener securing the chair-back fabric to the frame.
4.3.4 Lift the chair-back up and away from the chair base.
www.pridemobility.com
ZIP UNZIP
Power Lift Recliner Series