Residual Risks; Package Contents; Electrical Safety - DeWalt DW650 Original Instructions Manual

EN GLI SH
3. Dispose of dust particles and any
other removal debris safely.

Residual Risks

In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing
– Risk of personal injury due flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
– Risk of personal injury due to harmful, toxic dust
when sanding.
– Risk of personal injury when touching the roller
shaft and roller.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual
before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. 1)
The Date Code (p), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Belt sander
1 Dustbag
1 Dust extraction adaptor (option)
1 Sanding belts
1 Sanding frame (option)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
24
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/Off switch
b. Speed control dial (DW650E)
c. Lock-on button
d. Clamping spring
e. Sanding belt
f. Belt centring knob
g. Dustbag
h. Dust extraction adaptor
i. Guiding handle
j. Roller shaft
k. Roller
l. Clamping lever
INTENDED USE
Your D WALT belt sanders DW650 and DW650E
E
have been designed for quick sanding of wood,
metal and plastic in a professional environment.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These sanders are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.

Electrical Safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 60745; therefore no
earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organization.
E
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.