Related Manuals for DeWalt DW433-XE
Summary of Contents for DeWalt DW433-XE
- Page 1 INSTRUCTION MANUAL BELT SANDER 76MM X 533MM (3” X 21”) VARIABLE SPEED MODEL: DW433-XE...
- Page 2 Fig. 1 Fig. 2 (P)Dust Collection Shut-Off Valve (H)Rear (E)Lock-On Button Handle (D)Trigger Switch (F)Handle (J)Dust Bag (G)Handle Position 2 (G)Handle Position 2 (G)Handle Position 2 (G)Handle Position 2 (G)Handle Position 2 (C)Brush Cover (I)Tracking Knob (A)Lever...
-
Page 3: Safety Instructions
SAFETY INSTRUCTIONS 14. Disconnect tool. Shut off power and wait for the tool to come to a complete standstill before leaving it unattended. Unplug the tool when not in use, before servicing or changing accessories. When using power tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. - Page 4 ADDITIONAL SPECIFIC SAFETY INSTRUCTIONS PRECAUTIONS TO TAKE WHEN SANDING PAINT Sanding of lead based paint is NOT RECOMMENDED due to the difficulty of controlling FOR SANDERS the contaminated dust. The greatest danger of lead poisoning is to children and pregnant women. •...
-
Page 5: Operation
ASSEMBLY OPERATION SWITCH OPERATION REPLACING THE SANDING BELT • To start the belt sander, depress the trigger switch (D). Allow the belt sander to reach WARNING: BE SURE SANDER IS TURNED OFF AND DISCONNECTED FROM THE WARNING: BE SURE SANDER IS TURNED OFF AND DISCONNECTED FROM THE operating speed before touching the work surface (Fig.1). - Page 6 To Properly Track The Belt (FIG. 2) To Empty The Dust Collector Fig. 6 1. Grasp the rear handle (H) of the unit firmly and flip the sander so that the belt is 1. Pull up on the locking dust chute collar. facing the operator.
- Page 7 Fig. 7 WARNING: WARNING: Do not allow the fence WARNING: BE SURE THE UNIT IS TURNED OFF WARNING: BE SURE THE UNIT IS TURNED OFF Fig. 10 to touch the sanding belt. Resulting AND NOT ATTACHED TO A POWER SOURCE WHILE sparks may ignite dust particles.
-
Page 8: Maintenance
MAINTENANCE ACCESSORIES WARNING: WARNING: Turn off and unplug sander before making any adjustments or removing or Recommended accessories for use with your tool are available at extra cost from your local service centre. Call 1800 654 155 (Aust) or 09 526 2556 (NZ). installing accessories. - Page 9 GUARANTEE INFORMATION HOTLINE Applicable to hand held power tools. When you need further information on a D WALT product please phone: FULL ONE YEAR WARRANTY AUSTRALIA: 1800 816 900 WALT heavy duty industrial tools are warranted for one year from date of purchase. We NEW ZEALAND: 09 579 7600 will repair, without charge, any defects due to faulty materials or workmanship.
- Page 10 Note: This instruction manual is applicable for the following subcodes: –XE WALT Industrial Tool Company Part No. 618908-00...