Adjusting The Audio Input Level; Switching To Line Automatically-Qp Link; Changing The Qp Link Sensitivity - JVC RD-HA3B Instructions Manual

Adjusting the Audio Input Level

If the sound from the component connected to the LINE IN
jack is too loud or is too quiet when changing from another
source to "LINE," you can change the audio input level
through the LINE IN jack (without changing the volume
level).
While LINE is selected as the source...
2 sec
LEVEL 3
Select this when the sound is too loud with
LEVEL 1
"LEVEL 2" selected. This setting is
recommended when connecting an audio
device other than a portable audio device
to the LINE IN jack.
Select this when the sound is too loud with
LEVEL 2
"LEVEL 3" selected.
Select this when listening to a portable
LEVEL 3
audio device (initial setting).
Switching to LINE Automatically
—QP Link Remote
ONLY
Quick Portable Link (QP Link) automatically switches the
source to LINE as the auxiliary equipment connected to the
LINE IN jack starts playback.
• Make sure to set the volume of your portable audio device
loud enough so that the System can detect the sound signal.
• QP Link does not work when the System is operating on
batteries.
To activate QP Link
QP LINK ON
Remote
ONLY
LEVEL 1
LEVEL 2
QP LINK
When QP Link is activated, connecting a portable device to
the LINE IN jack and starting playback performs the
following:
• While listening to another source...
Changes the source to LINE automatically. (If you change
from LINE to another source, QP Link will be canceled.)
• While the System is on standby...
Turns on the System and changes the source to LINE
automatically (not applicable when the display is turned
off).
To deactivate QP Link
"QP LINK OFF" appears on the
display and the QP LINK indicator
disappears.

Changing the QP Link Sensitivity

You can change the LINE IN jack sensitivity if QP Link
malfunctions by detecting non-playback signals such as
switching noises from the auxiliary equipment.
While LINE is selected as the source...
2 sec
Normally select this. (Initial setting)
QP: LEVEL1
Select this when QP Link works
QP: LEVEL2
mistakenly.
Remote
ONLY
QP: LEVEL1
QP: LEVEL2
16