Notes On Operation; Playable Disc/File Types; Learning More About This System - JVC RD-HA3B Instructions Manual

Playable Disc/File Types

• Audio CD.
• CD-R/-RW recorded in the Audio CD format.
• MP3, WMA or WAV files on DVD-R/-RW, CD-R/
-RW or USB mass storage class device.
In addition to the above discs/files, this System can play
back audio data recorded on CD-Extra/CD Text.
• The following discs cannot be played back:
DVD Video, DVD Audio, DVD-RAM, VCD, SVCD,
CD-I (CD-I Ready), CD-ROM, Photo CD, CD-G (CD-
Graphics), and DVD Text.
Playing back these discs will generate noise and damage
the speakers.
Caution for DualDisc playback
The Non-DVD side of a "DualDisc" does not comply with
the "Compact Disc Digital Audio" standard. Therefore, the
use of the Non-DVD side of a DualDisc in this product may
not be recommended.
Data Hierarchy
Level 1 Level 2 Level 3
(Root)
Group with its play order
Track with its play order

Learning More about This System

Connections
(see pages 3 and 4)
Connecting the antenna:
• Make sure the antenna conductors do not touch any other
terminals, connecting cords or the power cord. Also, keep
the antennas away from metallic parts of the System,
connecting cords, and the AC adaptor. This could cause
poor reception.
19

Notes on Operation

Level 4 Level 5
To record the playback sound on an external component:
• Sound adjustment does not affect the recorded sound.
Inserting Batteries:
• The memory backup batteries will not be consumed as long
as the power is supplied from an AC outlet or 10 loaded
batteries. However, if no power is supplied to the System,
the memory backup batteries should be replaced with new
ones approximately every 12 months to securely maintain
the contents of the memory.
• Before replacing the memory backup batteries, always
connect the AC adaptor to the System to prevent the
contents of memory from being erased.
• When a power failure occurs, the time indication
disappears from the display to save the battery power of the
memory backup batteries.
• Unplug the AC adaptor from the System to supply the
power through the batteries.
• When the batteries are exhausted, "LOW BATTERY"
appears on the display and mistracking will occur during
disc playback. If this happens, replace the batteries.
Basic Operations
(see pages 5 and 6)
Turning on the System:
• When operating the System on batteries...
– The STANDBY lamp does not light.
– The backlight of the display does not turn on (and
Dimmer does not work).
– While the System is turned off (on standby), the clock
indication is not displayed.
– While the System is turned off (on standby), you can use
only [ (Standby/On)] on the main unit.
([STANDBY/ON ] on the remote control does not
work.)
– While the System is turned off (on standby), you cannot
change the AM tuner interval spacing.
– While the System is turned off (on standby), you cannot
lock/unlock the disc tray.
– QP Link does not work.
– Daily Timer does not work.
Setting the Clock:
• "0:00" will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
Adjusting the Sound:
• The subwoofer volume adjustment does not affect the
sound through the headphones.
• Tone adjustments affect the sound through the headphones.
Turning Off the Power Automatically:
• Auto Standby does not work while listening to an FM or
AM station.