Listening To The Radio - JVC RD-HA3B Instructions Manual

Remote control
Number
buttons
PRESET
DOWN
PRESET
UP
FM MODE
Main unit
FM/AM
7

Listening to the Radio

SET
TUNING
UP
TUNING
DOWN
FM/AM
UP
4 x
DOWN
Listening to the Radio
To set the AM tuner interval spacing
Before operating the tuner, it is required to select the
appropriate AM space interval used for your area.
• Change the source to AM before the operation.
• AC power supply is required to do the operation while the
System is turned off.
To select 9 kHz interval
(while holding...)
To select 10 kHz interval
(while holding...)
To select the band (FM or AM)
Remote control:
FM
AM
To tune in to a station
While FM or AM is selected...
Remote control:
The frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.
Main Unit
ONLY
Main unit:
FM
AM
Main unit: