Troubleshooting - Primax Electronics M7B301 User Manual

7 Troubleshooting

If you have any problems with your Bluetooth mouse, please check
the following:
• Check the system requirements to make sure that your system
is compatible.
• Check to see if the batteries in the mouse are installed
correctly. Make sure the polarity of the batteries corresponds
with the polarity signs inside the mouse battery compartments.
• When the mouse LED is lit red, it indicates battery power low.
Replace them with new batteries immediately.
• Once the Bluetooth stack (see "Installing the WIDCOMM
Bluetooth Stack" on page 4) has been installed in your
computer, you can check the battery status of mouse from
Control Panel > Mouse > Bluetooth.
• If the mouse fail to work, check the USB mouse function in your
system's BIOS. The function should be enabled for the normal
use of mouse.
• If your PC system's BIOS setup has options for the mouse,
make sure they are set to default settings. If you are not
familiar with the BIOS, refer to your PC's manual for more
information.
• Only use the mouse on a clean, flat, non-slippery surface in
order to ensure smooth and accurate cursor action. If you use
a mouse-pad, choose a light-colored one, not a dark one, to
use less battery power.
For further assistance with any other questions you may have, please
contact your dealer for technical support.
14
Bluetooth Mouse Set