Pairing On Widcomm Bluetooth Stack - Primax Electronics M7B301 User Manual

4.2 Pairing on WIDCOMM Bluetooth Stack

Before using the Bluetooth stack for mouse pairing, install the stack
as instructed in "3 Installing and Uninstalling the WIDCOMM
Bluetooth Stack" on page 4. Then follow the steps below.
To start the Bluetooth stack for the first time, see "6 Using the
Stack for the First Time" on page 12 for more information.
1. Press the USB Bluetooth dongle button until the following Human
Interface Device (HID) screen appears.
2. When the mouse is connected, the following confirmation
message appears. Click to confirm that the correct mouse is
connected.
10
Bluetooth Mouse Set