Part Parameters - Roland HP-337 Manual

40 01 38 00 00 01
40 01 39 00 00 01
40 01 3A 00 00 01
40 01 3B 00 00 01
40 01 3C 00 00 01
40 01 3D 00 00 01
40 01 3E 00 00 01
40 01 3F 00 00 01
* CHORUS MACRO is a macro parameter that allows global setting of chorus parameters. When you use CHORUS MACRO to select the chorus type, each chorus parameter will be set to the
most suitable value.

Part Parameters

HP-337 has 16 parts. Parameters that can be set individually for each Part are called Part parameters.
If you use exclusive messages to set Part parameters, specify the address by Block number rather than Part Number (normally the same number as the MIDI channel). The Block number can be
specified as one of 16 blocks, from 0 (H) to F (H).
The relation between Part number and Block number is as follows.
x...BLOCK NUMBER (0-F),
Address (H) Size (H)
40 1x 00 00 00 02
40 1x 01#
40 1x 02 00 00 01
40 1x 03 00 00 01
40 1x 04 00 00 01
40 1x 05 00 00 01
40 1x 06 00 00 01
40 1x 07 00 00 01
40 1x 08 00 00 01
40 1x 09 00 00 01
40 1x 0A 00 00 01
* When "GM1 System On" and "GM2 System On" are received, Rx. NRPN will be set OFF. When "GS Reset" is received, it will be set ON.
40 1x 0B 00 00 01
40 1x 0C 00 00 01
40 1x 0D 00 00 01
40 1x 0E 00 00 01
40 1x 0F 00 00 01
40 1x 10 00 00 01
40 1x 11 00 00 01
40 1x 12 00 00 01
40 1x 13 00 00 01
40 1x 14 00 00 01
* ASSIGN MODE is the parameter that determines how voice assignment will be handled when sounds overlap on identical note numbers in the same channel (i.e., repeatedly struck notes).
This is initialized to a mode suitable for each Part, so for general purposes there is no need to change this.
40 1x 15 00 00 01
* This parameter sets the Drum Map of the Part used as the Drum Part. HP-337 can simultaneously (in different Parts) use up to two Drum Maps (MAP1, MAP2). With the initial settings, Part10
(MIDI CH = 10, x = 0) is set to MAP1 (1), and other Parts are set to normal instrumental Parts (OFF (0)).
40 1x 16 00 00 01
40 1x 17 00 00 02
40 1x 18#
* PITCH OFFSET FINE allows you to alter, by a specified frequency amount, the pitch at which notes will sound. This parameter differs from the conventional Fine Tuning (RPN #1) parameter
in that the amount of frequency alteration (in Hertz) will be identical no matter which note is played. When a multiple number of Parts, each of which has been given a different setting for
PITCH OFFSET FINE, are sounded by means of an identical note number, you can obtain a Celeste effect.
00-07 CHORUS MACRO
00-07 CHORUS PRE-LPF
00-7F CHORUS LEVEL
00-7F CHORUS FEEDBACK
00-7F CHORUS DELAY
00-7F CHORUS RATE
00-7F CHORUS DEPTH
00-7F CHORUS SEND LEVEL TO REVERB
Part 1 (MIDI ch = 1) x = 1
Part 2 (MIDI ch = 2) x = 2
: : :
Part 9 (MIDI ch = 9) x = 9
Part10 (MIDI ch = 10) x = 0
Part11 (MIDI ch = 11) x = A
Part12 (MIDI ch = 12) x = B
: : :
Part16 (MIDI ch = 16) x = F
Data (H) Parameter
00-7F TONE NUMBER
00-7F
00-10 Rx. CHANNEL
00-01 Rx. PITCH BEND
00-01 Rx. CH PRESSURE (CAf)
00-01 Rx. PROGRAM CHANGE
00-01 Rx. CONTROL CHANGE
00-01 Rx. POLY PRESSURE (PAf)
00-01 Rx. NOTE MESSAGE
00-01 Rx. RPN
00-01 Rx. NRPN
00-01 Rx. MODULATION
00-01 Rx. VOLUME
00-01 Rx. PANPOT
00-01 Rx. EXPRESSION
00-01 Rx. HOLD1
00-01 Rx. PORTAMENTO
00-01 Rx. SOSTENUTO
00-01 Rx. SOFT
00-01 MONO/POLY MODE
(= CC# 126 01 / CC# 127 00)
00-02 ASSIGN MODE
00-02 USE FOR RHYTHM PART
28-58 PITCH KEY SHIFT
08-F8 PITCH OFFSET FINE
00: Chorus 1 02
01: Chorus 2
02: Chorus 3
03: Chorus 4
04: Feedback Chorus
05: Flanger
06: Short Delay
07: Short Delay (FB)
0-7 00
0-127 40
0-127 08
0-127 50
0-127 03
0-127 13
0-127 00
Description Default Value (H)
CC#00 VALUE 0-127 00
P.C. VALUE 1-128 00
1-16, OFF Same as the Part Number
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 00 (01*)
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
Mono/Poly 01
0 = SINGLE 00 at x = 0
01 at x ≠ 0
1 = LIMITED-MULTI
2 = FULL-MULTI
00 at x ≠0
0 = OFF
1 = MAP1 01 at x = 0
2 = MAP2
-24 - +24 [semitones] 40
-12.0 - +12.0 [Hz] 08 00
Use nibblized data.
Chorus 3
0
64
8
80
3
19
0
Description
0
1
ON
ON
ON
ON
ON
ON
ON
OFF (ON*)
ON
ON
ON
ON
ON
ON
ON
ON
Poly
SINGLE at x = 0
LIMITED-MULTI at x ≠0
OFF at x ≠0
MAP1 at x ≠0
0 [semitones]
0 [Hz]
10