Table of Contents
Advertisement
Step 3: Press the programming switch button on the Z-Wave device for connection. The
location of programming switch button depends on the type of Z-Wave device
that you use. Please refer to the user manual of the Z-Wave device.
Step 3: Press the programming switch button on the Z-wave device.
Plug-in on/off module
p.s. You also canbuy these Z-Wave devices such as Plug-in on/off module, Door sensor,
PIR sensor, Wireless siren...etc. from Avadesign Technology.
Step 4:When your Z-Wave device has added successfully, the message of "Add Device:
Command has completed successfully"will display on the screen.
Step 5:When the new Z-Wave device was found,you can modify the name and room
settingsas shown below.
The Z-wave device was added successfully.
18
Advertisement
Table of Contents
