Table of Contents
Advertisement
You also can click the "reset" button to reset the system shown as above diagram. Then you
can click on "OK" button to reset the system or "Cancel" button to quit the reset process.
3.2.3 Topology
The topology diagram shows the connection relationship of ZA1002US-5 and all of Z-wave
devices. The small square at row 1 and column 1 represents the ZA1002US-5. The small
square at row 1 and column 2 represents a Z-Wave device. Applying the topology diagram,
user can decide the control path of ZA1002US-5 and each Z-Wave device. For example,
theZA1002US-5can control the remote device B indirectly by device A.
SetZwave－Topology
B
A
22
Advertisement
Table of Contents
