Device Overview; Pairing Your Smartphone - Garmin IMPACT Owner's Manual

Introduction
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.

Device Overview

Hold to open and close menus.
Press to move to the next item in a menu.
Hold to turn on the device.
Press to select items in a menu.
Press to move to the next screen.
Power and Connect a cable to charge your device or transfer
data port files.
Charging the Device
This device contains a lithium-ion battery. See the Important
Safety and Product Information guide in the product box for
product warnings and other important information.
To prevent corrosion, thoroughly clean and dry the contacts and
the surrounding area before charging or connecting to a
computer. Refer to the cleaning instructions in the appendix.
1
Plug the small end of the USB cable into the charging port on
your device.
2
Plug the large end of the USB cable into a USB port on your
computer.
3
Charge the device completely.
Turning On the Device
Hold .
Turning Off the Device
1
Hold to open the menu.
2
Select Power Off > Yes.
Attaching the Sensor to a Bat
1
Insert the knob of your bat into the narrow end of the mount.
Introduction
WARNING
WARNING
NOTICE
2
Insert the device in the opening on the mount.
NOTE: When positioning the device, verify that the button
aligns with the oval-shaped indentation

Pairing Your Smartphone

Your Impact device must be paired directly through the Impact
app, instead of from the Bluetooth
You can pair your Impact device with your smartphone during
the initial setup or through the Bluetooth menu.
1
From the app store on your smartphone, install and open the
Garmin Impact app.
®
2
Select > PAIR DEVICE.
3
From the Impact device, hold
4
Select Bluetooth > Pair Phone.
5
Follow the instructions in the app to complete the pairing and
setup process.
After you pair successfully, a message appears, and your device
syncs automatically with your smartphone.
Batter Profiles
When you first install the Impact app, you are prompted to set
up a batter profile. You can add batter profiles, or edit existing
profiles at any time.
Selecting a Batter Profile
1
From the Impact app, select PROFILE.
2
Select the current batter profile image.
3
Select a batter profile.
Adding a Batter Profile
1
From the Impact app, select PROFILE.
2
Select the current batter profile image.
3
Select .
4
Enter the batter profile information.
Editing a Batter Profile
1
From the Impact app, select PROFILE.
2
Select the current batter profile image.
3
Select a batter profile.
4
Select .
on the mount.
® settings on your smartphone.
to open the menu.
1