BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS Congratulations on your purchase of this WINCO commercial induction range. WINCO takes pride in the quality of its products. When used as intended and with proper care and maintenance, you will experience years of reliable operation from this equipment.
Introduction Congratulations on the purchase of your WINCO machine. Please take the time to carefully read through this manual to ensure the machine is operated and maintained properly, to ensure the best possible performance from this product for many years.
2. Clean any glue residue left over from the plastic or tape. WINCO prides itself on quality and service, ensuring that at the time of packing, all products are supplied fully functional and free of damage.
WINCO Authorized Service Center for examination, repair and/or unintentionally. adjustment. NOTE: 6. The use of accessory attachments not recommended by WINCO may cause fire, electric shock or injury. Use of an adapter is not permitted in Canada. WARNING AVERTISSEMENT SAVE THESE INSTRUCTIONS fire hazard.
Retournez l’appareil au centre de service autorisé WINCO le plus proche pour examen, réparation et/ou réglage. MISE EN gARdE : AVANT d'uTIlISER uN AdApTATEuR, Il fAuT 6.
HEAT or TEMP buttons. The unit will and then shut down. default to Heat mode (EIC-400 to 1300W or EIC-400B to 1600W), 4. Please note that the maximum cooking time is 150 minutes. If when turned on.
NeveR attempt to repair the unit depending on the volume of production. or replace a damaged power cord yourself. Contact a WINCO® Approved Service Technician to make repairs. ALWAYS unplug the unit after every use, before cleaning and when not in operation.
Limited Warranty ReGIsteR oNlINe At: WINCO warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within http://support.wincous.com North America and subjected to normal use, is free from defects in Proof of purchase is required to extend warranty more than 1 year material or workmanship for a period of 1 year.
Need help?
Do you have a question about the EIC-400 and is the answer not in the manual?
Questions and answers