Table of Contents
Advertisement
Note: Both you and the contact(s) must have the watch added to your app accounts for
the contact numbers to appear on your message contact list.
Listen to Voice Messages
When the watch has a message you will see the Message symbol on the watch display.
To listen to a message on a watch, short press the Voice Message Button once to
download the message and listen. If you want stop to listening during the message, just
short press once the Voice Message Button to stop the message. You can only listen to
a message once on the watch.
Shake - Shake to Make "Voice Message" Friends
Your Assure watch comes with a Shake-Shake to make friends feature for 2 watches to
share their contact details with each other so they can send voice messages to each
other. To use this feature, press and hold the voice message button and shake the two
watches at the same time to pair them both successfully and add each other into the
voice message contact list. While holding the button you will see image of a watch on a
wrist shaking. The word "pairing" should then appear on both watches while the watches
are pairing with each other. When the watches have paired you will see new friend and
the contact number appear on the watch. If you receive a failed message, start the
process again. To name the new friend contact, Press on Family list, press on the contact
in the list, Press edit, Press on the name, arrow back to remove the words "New Friend",
add your contact name and Press OK You can add up to 10 Voice Message contacts to
each watch. These contacts do not affect your 16 family contact number limit.
Note: These contacts can only message each other. If you wish for 2 watches to voice
call each other, you must add each watch mobile number into each watch contacts list.
Power Off or Reboot the Watch
The watch will not power off using the SOS/power button once a sim card is fitted. To
power off or to reboot the watch, insert a pin into the hole above the USB charging port.
The watch will power off and must be powered back on by a long press of the SOS Button.
When there is no sim card fitted, the watch will power off by holding the SOS/Power
button for about 3 seconds.
Note: This reboot does not delete any contact details from the watch and is different to
Reset in Watch Settings which resets the watch to factory settings as explained above.
The watch can also be powered off remotely in Watch Settings in the App.
Removing and Refitting the Sim Card
If you need to remove the sim card, power off the watch using the reboot button and
remove the Watchovers sim card by pushing in the sim card. The sim card will spring
back but you may need a tweezers to carefully pull the sim card out of the slot to avoid
damaging the sim card or the sim port.
With the watch powered off, insert your micro sim card as per the diagram below and
power on the watch by pressing the SOS button for about 3 seconds.
19
Advertisement
Table of Contents
