Table of Contents
Advertisement
Power off Watch Remotely
This feature allows you to remotely power off the watch and set the watch to power on
again automatically at a set time and date. Press on Power off watch remotely, set the
time and date and Press OK. The watch will power off immediately and will power back
on at the time and date you have set.
Tracking Mode
You can set the watch to update its' position automatically every 60 seconds or manually.
In Manual mode, the watch will send its' position only when you press the Locate button
on the map screen. The battery charge lasts longer in manual mode but Geo-Zones
feature and track mode will not work. To change the tracking mode, Press on tracking
mode and press on the circle of the setting you require. The circle will turn blue to
confirm the setting you have selected is now set.
Watch Silent Times
You can set the watch to be silent at certain times on certain days such as while in school.
This setting mutes the ring tone on the watch during the set times. This setting only
mutes the ringtone during the times you have set. The watch can still make and receive
calls and voice messages. You can preset up to 5 silent times. To set a silent time, Press
on Watch silent time, Press the + plus symbol, select the start and end time and the
days of the week that you wish the watch to be silent, and Press complete. You can turn
on and off your preset silent times by sliding the button to the on or off position. If you
have added 5 preset silent times, you cannot delete a preset silent time from the list,
simply Press on a preset silent time, edit the times and days and Press complete to
change it.
Watch time
To set the correct time and date on the watch, Press on Watch Settings, Tap on Watch
time, check the time shown in Set Watch Time is correct and Press Complete. If the time
is incorrect in Set watch time, tap on the time, change it to the correct time and Press
Complete.
Watch Alarms
You can set multiple repeat alarms such as to take medicine at set times each day. What
you type in the Alarm label, will appear on the watch screen when the alarm rings, up to
a maximum of 20 characters. On the watch, Press any button to stop the alarm ringing.
To set watch alarms, Press on watch settings, Press on Watch alarms, Press on the +
plus symbol, select the time, select the day or days by Pressing on each day, enter your
alarm name and Press complete.
Locate Watch
If you have misplaced the watch, you can Press the Locate watch button to make the
watch ring constantly for 1 minute to help you locate it, once the battery has power. To
use Locate Watch, Press on Watch settings, Press on Locate watch and Press Find now.
14
Advertisement
Table of Contents
