Table of Contents
Advertisement
Geo-Zones
A Geo-Zone or Safe Zone is an area with a virtual boundary or fence set by you. For
example you can set up a Safe zone around your house, school or park and receive an
alert if the watch leaves the zone. Zones can also be set that you get an alert if the watch
enters the zone, exits a zone and Enters or Exits a zone.
1) To set a Geo-Zone, press the Geo-Zone icon.
2) Press the Plus + symbol to add a new Geo-Zone.
3) Tap on the screen to move the location of the zone you wish to set. If the location
is off the screen, move the screen to the location you wish to set the zone and tap
on the screen once to move the zone area to your map location.
4) Set the diameter using the slider.
5) Tap on Settings to set your Geo-Zone name and tap the Alert Policy to set
receiving an alert if the watch exits a zone, enters a zone or both enters or exits a
zone.
6) Tap complete to save your new Geo-Zone.
Note: False Alerts - GPS devices are designed for outdoor use. When the device is
indoors, usually showing as LBS, you may get false Geo-Zone breach alerts. This occurs
if the setting of the Geo-Zone is around a building such as your house, as the diameter
may be too small which can result in false alerts when the watch is indoors. The
minimum Geo-Zone diameter is 500 meters to reduce the level of false alerts. If you are
receiving false alerts, extend the zone wider around the house to reduce false alerts.
11
Advertisement
Table of Contents
