Reset To Factory Settings; Map Screen; Locate Button - WatchOvers Assure User Manual

Reset (to Factory settings)
You can reset the watch back to factory settings with the Reset Option which will remove
the administrator, clear all information on the watch such as family contact numbers,
reset the watch and will also remove the watch from all other app accounts it has been
added to. This setting cannot be reversed. To use the watch again you will need to pair
the watch to your App account again. To reset the watch, Press Watch settings, Press
Reset, Press reset again. You are given the option at this point to cancel this request or
to proceed.

Map Screen

The map screen has a number of features managed from this screen.
You can change the map view to satellite map, 2D map, or 3D map by pressing the
circular icon near the top right hand side of the screen and tap on the view you prefer.

Locate Button

Press the Locate icon on the bottom left of the map screen to check the current position
of the watch if set on manual tracking mode. The location should update in about 60
seconds.
The Satellite image on the right of the location address details indicate that the location
is displayed using GPS which is very accurate. When this symbol is an Ariel, this
indicated that the location is using LBS (the local mobile mast base stations), which is
usually when the watch is indoors and is less accurate.
15