Nu-Flame CHESNEYS ALCHEMY EVOLUTION PLUS N2 Use & Maintenance Instructions page 5

INSTALLATION & SERVICING INSTRUCTIONS
l. Check that the black burner insulation pad is in place, on top of the stainless steel burner. This ensures the base of the tray
and the stainless steel burner assembly are not subjected to excessive temperature, which could be detrimental to the
controls and may void warranty. The burner should never be run without this pad.
Before proceeding to section m. cover the slots in the burner pad with sellotape. This will ensure the burner slots are kept clear
m. With the slots in the burner pad covered by sellotape half fill the tray with the vermiculite supplied, then agitate with a
screwdriver or some such thing until the level drops, showing that the void under the burner block is filled. Then refill to the
top. Sweep any vermiculite off the top of the burner insulation pad, remove the sellotape and ensure that the slots in the
burner insulation pad are clear.
It is very important to ensure the following in order not to void the warranty:
1. The gap under the burner block is filled with vermiculite
2. The burner insulation pad is in position and the slots are clear
Typical burner in basket showing black insulation pad in position and vermiculite fill, ready to lay ceramics
Vermiculite and burner insulation pads are consumable items and spares can be purchased from Nu-Flame by quoting the 'N'
number on the top right hand side of the data plate – e.g. N2.
Much of the fire's appearance is achieved by the placement of the fuel effect and Embaglow material. Follow the instructions that
apply to your fire to achieve best effect.
Chesneys Alchemy Evolution Plus Burners are supplied with either a log effect fuel bed or coal effect fuels bed, as chosen by the
customer:
Log set comprising bag of vermiculite, pack
of Embaglow, 5 logs & black bark chippings
Important Note!
when filling the tray with vermiculite.
ARRANGEMENT OF FUEL EFFECT
Page 5 of 12
Coal set comprising bag of vermiculite, pack
of Embaglow, coals & black bark chippings
(
continued)