indicates that Check Control messages have
been stored. You can have the Check Control
messages shown later on.
Viewing Check Control messages
stored in memory
Lightly push button 1 in the turn indicator
1.
stalk repeatedly up or down until the appro-
priate symbol appears in the display,
accompanied by the words "CHECK CON-
TROL".
Press button 2.
2.
"CHECK OK" appears if there are no Check
Control messages.
If a Check Control message has been
stored, the corresponding light is shown.
Lightly push button 1 to check for other
3.
messages.
4.
Press button 2.
The display again shows the outside tem-
perature and the time.
56
Online Edition for Part-No. 01 41 0 159 204 - © 03/05 BMW AG