TroubleshootNg - VTech BM2600 User Manual

Appendix
Troubleshooting (continued)
The video and audio monitor produces high-pitched
noise.
• The parent unt may be too close to the baby unt or another parent
unt. Make sure the parent unts and the baby unt are at least
1 metre away from one another.
• You may be too close to the baby unt or another parent unt when
you press and hold TALK. Make sure the parent unts and the baby
unt are at least 1 metre away from one another.
• You may have set the senstvty level too hgh. You may need to
adjust the senstvty level to a lower level to avod audo feedback
(pages 24 and 25).
My parent unit plays any sounds from the baby unit and
I think it is too noisy.
• You may have set the senstvty level to the hghest level
( ). If you do so, the baby unt wll transmt any sounds
detected to the parent unts. You may need to adjust the senstvty
level to a lower level (pages 24 and 25).
• You may need to adjust the speaker volume on the parent unt
(page 22).
My parent unit does not play any sound when there is
noise from the baby unit.
• Make sure the parent unt s powered up by connectng t to AC
power (page 8) or to the rechargeable battery pack provded (page 8) or to the rechargeable battery pack provded
(page 5).
• Make sure the power adapter and the parent unt are plugged n
correctly and securely (page 8).
• Make sure the parent unt s turned on (22) and the speaker volume
s not set to off (page 22).
• The parent unt may be too far away from the baby unt. Move the
parent unt closer to the baby unt (but not less than 1 metre).
• If the parent unt s powered by the provded battery pack, make
sure there s sufficent charge. Charge the battery n the parent unt
for up to 12 hours.
(page 8). .
31
You may need to