Filling Your Clean Water Tank - Bissell ProHeat 2x Revolution Pet Pro 1986 Series Quick Start User Manual

Filling Your Clean Water Tank:

1
The clean water tank
is at the top of the
machine.
3
FORMULA FILLING
INSTRUCTIONS
BISSELL 2X
Concentrated Formulas
NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR
TANK IN MICROWAVE. Do not substitute BISSELL 2X Formula cleaning solution
with other household cleaning products.
10
www.BISSELL.ca
Clean Water Tank
(1 Gallon)
Dirty Water Tank
Unscrew the cap
from the clean water
tank. Add hot tap
water to the water fill
line. Next, reference
the chart below for
formula amounts to
add to the tank. Twist
cap back into place.
DEEP CLEAN MODE
Fill water to the Water Fill
Line that is next to DEEP
CLEAN MODE on the Clean
Tank. Add 2.5 oz of formula.
Pour in more power with BISSELL Boosts
• Fill tank with water and 2X formula (Step 3 above).
• Add 2 ounces of any BISSELL Boost per 1 gallon of water.
• The ProHeat 2X Revolution has a 1 gallon clean water tank.
2
Lift the clean water tank straight up to
remove from the machine.
4
At the bottom of the upper handle, align
the clean water tank with the grooves and
slide the tank into place.
EXPRESS CLEAN MODE
Fill water to the Water Fill
Line that is next to EXPRESS
CLEAN MODE on the Clean
Tank. Add 1.25 oz of formula.