Pc Cards; Turning The Netbook Pro On And Off - Psion Teklogix Notebook Pro Quick Start Manual

Psion teklogix notebook pro quick start guide
Table of Contents

Advertisement

Available languages

Available languages

• Push the card into the card slot until it clicks. The
eject button next to the card slot pops out.
• To remove a card, press the eject button next to the
slot inwards. The card pops loose, and may be pulled
outwards.
Store your CF card safely.
Eject Button
Figure 2.9 CF Card Slot Location

2.2.4 PC Cards

PC Cards, which fit into a dedicated slot in the NETBOOK
PRO, can be non-volatile memory cards (used to store appli-
cation software and/or data). PC Cards can also be communi-
cations or interface cards.
The PC Card slot is located on the right side of the NET-
BOOK PRO.
12
Psion Teklogix NETBOOK PRO Win CE Quick Start Guide
45 !
CF Slot
Inserting And Removing A PC Card
• Push the card into the card slot until it clicks. The
eject button next to the card slot pops out.
• To remove a card, press the eject button next to the
slot inwards. The card pops loose, and may be pulled
outwards.
Store your PC Card safely.
Eject Button
Figure 2.10 PC Card Slot Location

2.3 Turning The NETBOOK PRO On And Off

To switch on:
open the NETBOOK PRO, then press and hold the Esc/
On key for 2 seconds.
Note: If the serial cable is connected to the PC and the
NETBOOK PRO, the NETBOOK PRO will automati-
PC Card Slot

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Notebook Pro and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents