Buffalo AIRSTATION WHR-1166D User Manual page 7

4
Turn on the AirStation and wait one minute.
5
If using a wired LAN, connect the AirStation LAN port and computer using a LAN cable.
If using a wireless LAN, connect the computer to the wireless LAN as described in Chapter 4.
6
Once your computer has booted, the AirStation's LEDs should be lit as described below:
Power/Diag: Green LED on.
Wireless: Green LED on.
Router: Amber LED on.
For LED locations, refer to chapter 1.
Note: If the router LED is not lit, set the mode switch to "Router".
7
Launch a web browser. If the home screen is displayed, setup is complete.
If username and password fields are displayed, enter "admin" for the username and "password" for the password,
then click [OK]. Step through the wizard to complete setup.
You've completed the initial setup of your AirStation. Refer to Chapter 3 for advanced settings.
7