Chevrolet Camaro 2018 Manual page 52

52 Voice Recognition
The access commands for playlists,
artists, and genres are prohibited
after the number of this type of
media exceeds 4,000.
The system will provide feedback
the first time voice recognition is
initiated if it has become apparent
that any of these limits are reached
during a device initialising process.
Voice Recognition for
Navigation
Navigation : Begin a dialogue to
enter specific destination
information.
Navigation Commands : Begin a
dialogue to enter specific
destination information.
Destination Address : Begin a
dialogue to enter a specific
destination address, which includes
the entire address consisting of the
house number, street name, city and
country.
Destination Crossroad : Begin a
dialogue to enter a specific
destination intersection.
Destination Place of Interest :
Begin a dialogue to enter a
destination Place of Interest
category or major brand name (if
equipped).
Not all brand names of businesses
are available for voice entry. Most
major chains, such as chains with
more than 20 locations, should be
available to search for by name, but
the name must be precisely spoken.
Nicknames or short names for the
businesses will not likely be found.
Lesser known businesses might
have to be located by category,
such as fast food, hotels, or banks.
Destination Contact : Begin a
dialogue to enter a specific
destination contact name.
Cancel Route : End route
guidance.
Voice Recognition for the
Phone
Call <contact name> : Initiate a
call to an entered contact. The
command may include location if
the contact has location numbers
stored.
Call <contact name> At Home,
At Work, On Mobile, or On
Other : Initiate a call to an entered
contact and location at home, at
work, on mobile device, or on
another phone.
Call <phone number> : Initiate a
call to a phone number such as
seven digits or 10 digits in length.
Pair Phone : Begin the Bluetooth
pairing process. Follow instructions
on the radio display.
Switch Phone : Select a different
phone for outgoing calls.
Voice Keypad : Begins a
dialogue to enter special numbers
like international numbers. The
numbers can be entered in groups
of digits with each group of digits
being repeated back by the system.
If the group of digits is not correct,
the command Delete will remove
the last group of digits and allow
them to be re-entered. Once the
entire number has been entered, the
command Call will start dialling the
number.