Chevrolet Camaro 2018 Manual page 49

needed, such as I want
directions to an Address,
Navigate to an Intersection, I
need to find a Place of Interest
or POI, or Directions to a
Contact. The system responds
by requesting more details. After
saying Place of Interest, only
major chains are available by
name. Chains are businesses
with at least 20 locations. For
other POIs, say the name of a
category like Restaurants,
Shopping Malls, or Hospitals.
Most languages do not support
natural language commands in
sentence form. For those
languages, use direct commands
like the examples shown on the
display.
There is no need to memorise
specific command words. Direct
commands might be more clearly
understood by the system. An
example of a direct command would
be Call <number> . Examples of
these direct commands are
displayed on most of the screens
while a voice session is active.
If Phone or Phone Commands, is
stated, the system understands that
a phone call is requested and will
respond with questions until enough
details are gathered.
If the phone number has been
saved with a name and a place, the
direct command should include
both, for example Call <name>
at work.
Using Voice Recognition for
List Options
When a list is displayed, a voice
prompt will ask to confirm or select
an option from that list. A selection
can be made by manually touching
the option, or by speaking the line
number for the item to select.
When a screen contains a list, there
may be options that are available
but not displayed. The list on a
voice recognition display functions
the same as a list on other displays.
Scrolling or flinging can be used to
help display other entries from
the list.
Manually scrolling or paging the list
on a display during a voice
recognition session suspends the
Voice Recognition
current voice recognition event and
plays the prompt Make your
selection from the list using the
manual controls or touch the Back
icon on the infotainment display to
try again.
If manual selection takes more than
15 seconds, the session terminates
and prompts that it has timed out.
The display returns back to the
display where voice recognition was
initiated.
The Back Command
Say Back or touch the Back icon
on the infotainment display to go to
the previous menu.
When in voice recognition and you
state Back all the way through to
the initial display, and then you state
Back once more, the voice
recognition session will cancel.
Help
Say Help on any voice recognition
display and the help prompt for the
display is played. Additionally, a
pop-up displays a text version of the
help prompt. Depending on how
voice recognition was initiated, the
49