Insignia NS-UZ53WH9 User Manual page 10

NS-UZ53WH9_17-0865_MAN_V2_EN.fm Page 10 Wednesday, December 6, 2017 10:10 AM
3 While one person tilts your freezer backwards, remove the bottom hinge screws and hinge and the two leveling feet.
Install the bottom hinge and leveling feet on the other side.
Tip
You can lay your freeze flat on the floor to make removing and installing the
bottom hinge easier. If you do lay it flat, when you return it to the upright
position, wait two hours before you plug it in.
Leveling foot
4 Remove the door stopper, then install it on the other side.
5 Align the door bottom so that the pin on the hinge slides into the hole in the door bottom.
10
Door stopper
www.insigniaproducts.com
5.3 Cu. Ft. Upright Freezer – White
Bottom hinge and screws