Configuration Switch Settings - Black Box Express 8-Port Mux User Manual

EXPRESS 8-PORT MUX
Note that connections to the DB25 and RJ-45 connectors are mutually exclusive. If any of the three pairs of the
RJ-45 connectors are selected, the DB25 is disconnected. If the DB25 is selected, the RJ-45 connectors are
disconnected. All jumper settings must be identical.
To reinstall the top cover, tilt the top cover down, and slide the top cover forward until it mates completely with
the bottom cover. Install the two top-cover screws.

3.2 Configuration Switch Settings

The configuration switch settings are shown below.
9