Ford MUSTANG 2018 Owner's Manual page 186

Brake Support: Assists the driver in
reducing collision speed by preparing the
brake system for rapid braking. Brake
support does not automatically activate
the brakes, but if the driver presses the
brake pedal even lightly, brake support
could add additional braking up to full
force.
Active Braking: Active braking may
activate if the system determines that a
collision is imminent. The system may help
the driver reduce impact damage or avoid
the crash completely.
Note: If you perceive Pre-Collision Assist
alerts as being too frequent or disturbing,
then you can reduce the alert sensitivity,
though the manufacturer recommends
using the highest sensitivity setting where
possible. Setting lower sensitivity would
lead to fewer and later system warnings.
Note: The system turns off when you
manually disable AdvanceTrac™, or when
you select Track mode.
Speed
62 mph
(100 km/h)
62 mph
(100 km/h)
62 mph
(100 km/h)
Adjusting Pre-Collision Assist
Settings
You can adjust the Alert and Distance Alert
sensitivity to one of three possible settings
by using the information display control.
See General Information (page 88).
Mustang (CZG) Canada/United States of America, Vehicles Built From: 07-08-2017, JR3J 19A321 AA enUSA, Edition date: 201707, Second Printing
Driving Aids
Sensitivity Graphics
Normal
Normal
Normal
Distance Indication and Alert
Distance Indication and Alert is a function
that provides a graphical indication of the
time gap to other preceding vehicles
traveling in the same direction. The
Distance Indication and Alert screen in the
information display shows a graphic similar
to the one that follows.
E190004
If the time gap to a preceding vehicle is
small, a red visual indication displays.
Note: Distance Indication and Alert
deactivates and the graphics do not display
when adaptive cruise control is active.
Distance Gap
Grey >82 ft (25 m)
56–82 ft
Yellow
(17–25 m)
Red <56 ft (17 m)
You can switch the distance alert and
indication function off using the
information display controls. See General
Information (page 88).
If required, you can switch active braking
off using the information display controls.
See General Information (page 88).
Note: Active braking automatically turns
on every time you switch your vehicle on.
183
Time Gap
>0.9sec
0.6sec - 0.9sec
<0.6sec