Maintenance; Lubrication; Cable Assembly Replacement - KFI A3000 Owner's Manual And Operating Instructions

Maintenance

Maintenance
The owner/operator is responsible for all
periodic maintenance.
WARNING
Never operate a damaged or defective winch.
WARNING
Improper maintenance will void your warranty.
Complete all scheduled maintenance in a
timely manner. Correct any issue before
operating the winch.
12

Lubrication

All moving parts within the Electric Winch
have been Lubricated using high
temperature lithium grease at the factory.
No internal lubrication is required under
normal conditions. If the winch is subjected
to extreme conditions lubrication may be
required using a high temperature lithium
grease. Lubricate Cable Assembly (4)
periodically using a light penetrating oil.
Cable Assembly
Replacement
It is recommended that any modifications be
performed by a manufacturer's authorized
repair facility, and that only manufacturer-
supplied parts be used
1. Rotate the clutch cap to the "Free Spool"
position.
2. Extend Cable Assembly to its full length.
Note how the existing cable is connected
to the inside of the drum.
3. Remove old Cable Assembly and attach
new one.
4. Rotate the clutch cap to the "Engage"
position.
5. Retract Cable Assembly onto drum
being careful not to allow kinking or
over heating of the winch.
A3000