Smart Diagnosis - LG GTF916PZPZD Owner's Manual

SMART DIAGNOSIS (Only for applied models)
Smart diagnosis function is...
Use the function to contact the service center and receive precise diagnosis when the refrigerator
malfunctions or fails. Use it only to connect to the consultant and do not use it in normal times.
How to use the function
1. Close all refrigerator doors, and press and
hold display lock button to make it locked
state.
If the display is already in locked state,
press and hold lock button to reset the lock and
press and hold the lock button again to make it
locked state.
w CAUTION
If it passes 5 minutes in locked state, smart
diagnosis function will not be activated, so be
careful.
2. Press and hold fridge temperature button for 3
seconds or longer.
(All display screens will be turned off, and in a
while, 3 will be displayed on the fridge
temperature display part.)
Be aware!
Difference of the regional call qualities may have influence on the function.
If you use home phone, better communication performance will enable much better service.
Smart diagnosis data transmission may not be fluent due to call quality problem, and in such case, smart
diagnosis service may be difficult.
3. Open all refrigerator compartment and freezer
compartment doors, and place the telephone
near the speaker hole at the top right side.
Check if the speaking side(microphone) of the
telephone is toward the speaker hole.
4. Do not take away the telephone while data is
being transmitted.
During the data transmission for smart diagnosis,
wait with the telephone placed near the speaker
hole at the top right side. The remaining time for
data transmission is displayed on the display
screen.
w CAUTION
The transmission sound may be irritating.
Do not take away the telephone until the sound
stops for good diagnosis.
5. After the completion of the data transmission,
listen to the explanation of the consultant
about the result of the smart diagnosis.
When the data transmission is completed, along
with the display of the data transmission
completion, the refrigerator will be automatically
turned off and on a few seconds later.
Listen to the explanation of the consultant about
the result of the analyzed diagnosis and follow the
instructions.
24