Philips 274E5QDAB/00(AD) Service Manual page 74

Meridian 5
74
2. It needs to reserve the 10 timings space in memory size.
Mode storing capacity
Factory preset modes
preset modes
User modes
1. Factory preset modes and preset modes are defined in the enclosed timing table file
Video timing mode for DVI/HDMI (internal firmware support) ,
2.
ITEM
1 OSD/keypad definition
2 OSD Translation
3 Power On logo
4 Audio Selection
: Refer to Timing table
: Refer to Timing table
: Refer to Timing table
Timing pixel clock over H/W limitation do not support.
Timing pixel clock over H/W limitation do not support.
VGA Video timing : interlace modes do not support.
60Hz: 480p/720p/1080i/1080p
50Hz: 576p/720p/1080i/1080p
OSD/Keypad functions
Stand-alone – On:
Isolate video and audio control
input
Stand-alone – Off:
Integrate video and audio control
input
Mute – On: Turn off audio
Mute – Off: Turn on audio
Reset -
No: Exit
Yes: Auto adjustment
for displaying timing
mode and recall factory
preset
Power On Logo: Power
On Show up Philips
logo 3 seconds
Change to input
signal.
This picture is reference
only. The official drawing
will send out by PM.