Philips 274E5QDAB/00(AD) Service Manual page 73

HDMI Cable
The input signals are applied to the display through HDMI cable.
Length
Connector type : HDMI male with DDC-2B pin assignments
Pin Assignment:
Pin No.
Timing requirement
Factory Preset mode definition:
1. Perfect FOS while presenting those timings.
2. Will specify those timing in User's Manual
Preset mode definition:
1. Need to support those timings.
2. Perfect FOS after auto adjustment.
User mode
1. Can save those timing that not in Preset mode and can be showed (not over
scaler or
16 Hot plug detect
17 T.M.D.S. data0-
18 T.M.D.S. data0+
19 T.M.D.S. data0 shield
20 No Connect
21 No Connect
22 T.M.D.S clock shield
23 T.M.D.S. clock+
24 T.M.D.S. clock-
: Please refer to M5 cable bundle summary file
1 TMDS Data2+
2 TMDS Data2 Shield
3 TMDS Data2–
4 TMDS Data1+
5 TMDS Data1 Shield
6 TMDS Data1–
7 TMDS Data0+
8 TMDS Data0 Shield
9 TMDS Data0–
10 TMDS Clock+
11 TMDS Clock Shield
12 TMDS Clock–
13 CEC
14 Reserved (HDMI 1.0-1.3c), HEC Data-
(Optional, HDMI 1.4+ with Ethernet)
15 SCL (I²C Serial Clock for DDC)
16 SDA (I²C Serial Data Line for DDC)
17 DDC/CEC/HEC Ground
18 +5 V Power (max 50 mA)
19 Hot Plug Detect (All versions) and HEC Data+
(Optional, HDMI 1.4+ with Ethernet)
Panel spec.)
White connector thumb-operated jackscrews
With transplant pin protective cover.
Description
Meridian 5
73