Philips 274E5QDAB/00(AD) Service Manual page 71

1. RGB signal :
2. YUV signal :
(But only 1080p define is OFF )
PC timing: to follow PC timing table
TMDS/+5V/DDC/HPD/CEC Signals
(TMDS Signal)
Termination Supply Voltage AV
Differential Voltage Level :
Common Mode Voltage :
Differential Sensitivity :
Maximum differential Voltage :
(+5V Power)
Power Supply Voltage :
Maximum Current Consumption :
(DDC Signal)
Maximum Capacitance :
(HPD Signal)
High Voltage Level :
Low Voltage Level :
Output Resistance :
(CEC Signal, not supported by this model)
Input Low Voltage :
Input High Voltage :
Output Low Voltage:
Output High Voltage:
Pull-up Resistor:
Leakage Current in standby/off :
Maximum Capacitance:
4). DisplayPort ( option , refer to Quick specification table)
5). USB Hub 2.0 (option , refer to Quick specification table)
6). Audio in ( option , refer to Quick specification table)
Input signal: 1Vrms
Loudspeaker: stereo of RMS Power
Frequency range: (WAIT FOR SUPPLIER INPUT)
Headphone connection will mute speaker
7). USB PLUG (option , refer to Quick specification table)
8). HDMI audio out (headphone): (option, refer to Quick specification table)
Stereo, > 50mVrms for headphone of 32
OFF (no this function)
(Video timming) ON (Be use and set ON/OFF)
: 3.3V±5%
CC
150mV – 1200mV
(AV – 300mV) – (AV
CC
1560mVp-p
2.4V – 5.0V
0 – 0.4V
> 2.0V
0 – 0.4V
2.5V – 3.6V
2.7K ±10%
< 1.8uA
Follow DisplayPort 1.1 specification.
USB port (1 upstream, 2 or 4 downstream)
USB port (1 upstream, 1 downstream), black jack color
– 37.5mV)
CC
150mVp-p
4.7V – 5.3V
50mA
50pF
1K ±20%
< 0.8V
100pF
Meridian 5
71