Setup Aid - Andrew 8212 User Manual

Installation

Setup Aid

LAU models may require the use of a setup (i.e. aid to initialize the port
channels). The setup aid for LAU models equipped with RJ45 connectors
is Andrew RTI-RJ. Use setup aid Andrew TRI-DC for data connector-
equipped LAUs. When using the setup aid on data connector-equipped
LAUs, be sure the cable from the LAU Main port to the MAU lobe port is
connected.
If the LAU does not seem to be operating properly, see Chapter 4,
Problem Determination.
28
Lobe Access Unit User's Guide