Hardware
Important Note:
The RJ45 connector cable used with your LAUs must have at least
two twisted pairs of wire for data, no matter what cable type is used.
The cable must be wired straight-through, as shown in Figure 5. Do
not connect transmit and receive wires in the same twisted pair; the
illustration below shows how to avoid this.
Figure 5.
Correct RJ45 connector and cable wiring
Data Connectors
The diagram below shows the transmit and receive pins in the Main and
Port Channel data connectors.
Figure 6.
Data connector transmit and receive pins
8
Lobe Access Unit User's Guide